Unox spare parts

Unox spare parts are used for repair and maintenance of professional ovens, combi ovens, convection ovens, proofers and other thermal kitchen equipment. This category is used to select Unox parts by equipment model, serial number, part number, nameplate photo, old part photo or information from a service engineer.

To view the manufacturer separately from the spare parts category, use the Unox page. It is more convenient for viewing the brand equipment and products, while this page is focused on service positions, parts, assemblies and repair components.

What is most often selected for Unox

For Unox equipment, the most common spare parts are connected with heating, ventilation, steam, control, chamber sealing, door, sensors and electrical assemblies. For ovens and combi ovens, it is especially important to check the model, appliance generation, voltage, control version and part compatibility with the exact execution.

• heating elements and power components;
• fans, motors, impellers and air circulation elements;
• temperature sensors, thermostats, control boards and buttons;
• door gaskets, glass, hinges, handles and door elements;
• steam, water and drain elements, valves and fittings;
• lamps, cables, connectors, fasteners and small service parts.

What data is needed for selection

For accurate Unox spare part selection, it is best to provide the equipment model and serial number immediately. If a part number or old part marking is available, this greatly reduces the risk of error. For thermal equipment, voltage, power, connection type, appliance generation, chamber execution, door elements and compatibility with the control version must be checked especially carefully.

• exact Unox equipment model;
• serial number or nameplate photo;
• part number or old part marking;
• photos of the part from different sides;
• photo of the installation place, connectors, fasteners and mounting assembly;
• fault description and equipment working conditions.

Why Unox parts should not be selected only by photo

Unox spare parts should not be selected only by visual similarity. Equipment generations, control versions, voltage, connection type, power, sensors, boards, motors, gaskets, door elements, steam assemblies and chamber execution may differ. A similar-looking part may not fit by size, connector, fastening, electrical parameters or operating logic.

Parts related to heating, electricity, steam, ventilation and control must be checked especially carefully. An incorrectly selected part may not solve the fault, may cause repeated failure, increase kitchen downtime or create unsafe equipment operation.

For service companies

When ovens and combi ovens are being repaired, downtime often affects the whole kitchen production process. If the main oven is not working, the kitchen loses the ability to cook, bake, regenerate or produce part of the menu. It is therefore important to identify the exact part quickly, check compatibility and understand delivery time.

For service companies, it is more efficient to send a request as a list: equipment model, serial number, several required positions, nameplate photos and old part photos. This reduces clarifications and helps collect a complete repair set for one appliance or site faster.

Related sections

• Unox — manufacturer page with Unox equipment and products;
• Unox spare parts — current category for Unox parts and components;
• Spare parts by producers — general section for spare parts by professional kitchen equipment brands;
• Rational Metos Henny Penny parts — parts for professional ovens, combi ovens and thermal equipment;
• MKN spare parts — service positions for professional MKN thermal equipment;
• Eloma — spare parts for professional ovens and thermal equipment;
• Hendi Spare Parts — spare parts for Hendi equipment and inventory;
• Maxima spare parts — service positions for Maxima equipment.

Practical notes from service engineers

• do not order a Unox part only from an internet photo — visual appearance does not guarantee compatibility;
• for electrical parts, voltage, power, connectors and execution must be compared;
• for heating elements, motors and fans, appliance model, mounting, fasteners and parameters must be checked;
• when replacing gaskets and door elements, door version and chamber size must be considered;
• if equipment has already been repaired, check whether a modified or non-original part was installed before;
• for urgent repair, it is better to send the nameplate photo, old part photo and fault description immediately;
• when working with ovens and combi ovens, sensors, safety elements and control errors must not be ignored.

Common mistakes when ordering Unox spare parts

• only the Unox brand is specified without the exact equipment model;
• there is no serial number or nameplate photo;
• a similar-looking part is ordered without checking the part number;
• appliance version, voltage or connection type is not considered;
• parts for different oven and combi oven generations are confused;
• the cause of failure is not checked and a new part is ordered instead of diagnostics;
• photos of the old part, mounting place, fasteners and markings are not attached.

Why GS24.lv / GASTROserviss for Unox spare parts

• more than 20 years of work with professional HoReCa equipment, service and spare parts;
• we understand repair specifics of professional ovens, combi ovens, proofers and thermal equipment;
• we select parts not only by name, but by model, serial number, part number, nameplate and real compatibility;
• we help service companies and kitchen owners clarify data on parts, lead times and possible replacements faster;
• we can work not only with Unox, but also with other professional kitchen equipment manufacturers;
• if one replacement is not enough, we can connect part selection with service, diagnostics and equipment repair.

Request Unox spare part selection

For accurate spare part selection, it is best to send equipment and part data immediately. This shortens checking time and reduces the risk of wrong ordering.

• brand and equipment model;
• serial number or nameplate photo;
• part number or old part marking, if available;
• photo of the part, connectors, fasteners and installation place;
• short description of the fault or error code;
• whether only part selection or also service / repair is needed.

Send request

FAQ

1. How to select a Unox spare part?

Selection requires equipment model, serial number, part number, nameplate photo or old part photo. The more accurate the source data, the lower the risk of wrong ordering.

2. Can a Unox part be selected only by photo?

It is better not to select only by photo. Similar parts may differ by fasteners, connectors, voltage, power, size or equipment version.

3. What to do if the part number is unknown?

Send the equipment nameplate photo, old part photo, fault description, error code and model data. These details allow possible options to be checked.

4. Which Unox spare parts are most often needed for service?

Heating elements, fans, motors, sensors, boards, buttons, door gaskets, glass, valves, cables and small service parts are often requested.

5. Why is the serial number important?

The serial number helps check equipment version, execution, production year and part compatibility with the exact appliance.

6. Can several parts be ordered for one repair?

Yes. For service companies, it is better to send a list of parts for one appliance or site so compatibility and delivery times can be checked immediately.