Fama Spare Parts

Fama spare parts are used for repair and maintenance of professional food preparation equipment: meat mincers, slicers, vegetable cutters, cheese graters, cutters and other electromechanical machines for kitchens and food production. This category is used to select Fama parts by equipment model, serial number, part number, nameplate photo, old part photo or information from a service engineer.

To view the manufacturer separately from the spare parts category, use the FAMA page. It is more convenient for viewing the brand equipment and products, while this page is focused on service positions, parts, assemblies and repair components.

What is most often selected for Fama

For Fama equipment, the most common spare parts are connected with mechanics, rotation transfer, cutting assemblies, product feeding, safety and control. For meat mincers, knives, plates, worms, bushings, housings and feeding elements are important. For slicers, blades, belts, carriages, holders, safety elements and thickness adjustment parts are often required. For vegetable cutters, cheese graters and cutters, discs, pushers, lids, drives, fasteners and safety interlocks may be needed.

• knives, plates, discs and other cutting elements;
• belts, gears, bushings, shafts and transmission elements;
• motors, capacitors, buttons and electrical components;
• lids, feeding throats, pushers and safety parts;
• handles, locks, fasteners, guides and adjustment elements;
• gaskets, seals, plastic and metal service parts.

What data is needed for selection

For accurate Fama spare part selection, it is best to provide the equipment model and serial number immediately. If a part number or old part marking is available, this greatly reduces the risk of error. For electromechanical equipment, mounting dimensions, shaft, gearbox, rotation direction, voltage, motor type and safety element version should be checked especially carefully.

• exact Fama equipment model;
• serial number or nameplate photo;
• part number or old part marking;
• photos of the part from different sides;
• photo of the installation place, connectors, fasteners and mounting assembly;
• fault description and equipment working conditions.

Why Fama parts should not be selected only by photo

Fama spare parts should not be selected only by visual similarity. Equipment generations, versions, voltage, motor, gearbox, cutting assembly, gears, belts, boards, buttons, safety elements, feeding parts and fasteners may differ. A similar-looking part may not fit by size, mounting, shaft, rotation direction, connector or execution.

Parts related to safety, rotation, electrics and cutting assemblies must be checked especially carefully. An incorrectly selected part may not only fail to solve the problem, but can also cause repeated failure, additional downtime or unsafe equipment operation.

For service companies

When food preparation equipment is being repaired, downtime often affects the whole kitchen or production section. If a meat mincer, slicer, vegetable cutter or cheese grater is not working, staff lose preparation speed and some processes must be done manually. It is therefore important to identify the exact part quickly, check compatibility and understand delivery time.

For service companies, it is more efficient to send a request as a list: equipment model, serial number, several required positions, nameplate photos and old part photos. This reduces clarifications and helps collect a complete repair set for one appliance or site faster.

Related sections

• FAMA — manufacturer page with FAMA products and equipment;
• Fama Spare Parts — current category for Fama parts and components;
• Spare parts by producers — general section for spare parts by professional kitchen equipment brands;
• Hallde spare parts — parts for vegetable preparation and food processing equipment;
• Spare parts for Robot Coupe — parts for cutters, vegetable slicers, blenders and food preparation equipment;
• Spare parts for SIRMAN — spare parts for slicers, meat mincers and food processing equipment;
• Hendi Spare Parts — spare parts for Hendi equipment and inventory;
• Maxima spare parts — service positions for Maxima equipment.

Practical notes from service engineers

• do not order a Fama part only from an internet photo — visual appearance does not guarantee compatibility;
• for mechanical assemblies, mounting, shaft, diameter, rotation direction and fastening must be checked;
• for electrical parts, voltage, connectors, power and execution must be compared;
• when replacing knives, plates and discs, the condition of mating parts must be checked, otherwise the new part may wear out quickly;
• if equipment has already been repaired, check whether a modified or non-original part was installed before;
• for urgent repair, it is better to send the nameplate photo, old part photo and fault description immediately;
• when working with meat mincers, slicers and vegetable cutters, safety elements and interlocks must not be ignored.

Common mistakes when ordering Fama spare parts

• only the Fama brand is specified without the equipment model;
• there is no serial number or nameplate photo;
• a similar-looking part is ordered without checking the part number;
• equipment version, voltage or execution is not considered;
• parts for meat mincers, slicers, vegetable cutters and cheese graters are confused;
• the cause of failure is not checked and a new part is ordered instead of diagnostics;
• photos of the old part, mounting place, fasteners and markings are not attached.

Why GS24.lv / GASTROserviss for Fama spare parts

• more than 20 years of work with professional HoReCa equipment, service and spare parts;
• we understand repair specifics of meat mincers, slicers, vegetable cutters, cheese graters and food preparation equipment;
• we select parts not only by name, but by model, serial number, part number, nameplate and real compatibility;
• we help service companies and kitchen owners clarify data on parts, lead times and possible replacements faster;
• we can work not only with Fama, but also with other professional kitchen equipment manufacturers;
• if one replacement is not enough, we can connect part selection with service, diagnostics and equipment repair.

Request Fama spare part selection

For accurate spare part selection, it is best to send equipment and part data immediately. This shortens checking time and reduces the risk of wrong ordering.

• brand and equipment model;
• serial number or nameplate photo;
• part number or old part marking, if available;
• photo of the part, connectors, fasteners and installation place;
• short description of the fault;
• whether only part selection or also service / repair is needed.

Send request

FAQ

1. How to select a Fama spare part?

Selection requires equipment model, serial number, part number, nameplate photo or old part photo. The more accurate the source data, the lower the risk of wrong ordering.

2. Can a Fama part be selected only by photo?

It is better not to select only by photo. Similar parts may differ by mounting, shaft, fasteners, voltage, size or equipment version.

3. What to do if the part number is unknown?

Send the equipment nameplate photo, old part photo, fault description and model data. These details allow possible options to be checked.

4. Which Fama spare parts are most often needed for service?

Knives, plates, discs, belts, bushings, gears, motors, buttons, lids, pushers, safety elements and feeding parts are often requested.

5. Why is the serial number important?

The serial number helps check equipment version, execution, production year and part compatibility with the exact appliance.

6. Can several parts be ordered for one repair?

Yes. For service companies, it is better to send a list of parts for one appliance or site so compatibility and delivery times can be checked immediately.